Audio Technica ES935/ML condenser gooseneck microphone

Audio Technica ES935/ML cardioid condenser gooseneck microphone

Designed for high-quality sound reinforcement in a super-compact design, the small-diameter, 12.20″-long gooseneck delivers flexible positioning with a sleek, low-profile appearance. Its integral power module requires 11-52V DC phantom power. The mic’s low-profile element provides a narrow MicroLine® polar pattern with 90º acceptance angle. It is equipped with a recessed switch that permits low-end roll-off for reduction of low-frequency ambient background noise.

  • Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
  • Low-profile element provides uniform MicroLine® polar pattern with narrow 90º acceptance angle
  • Unobtrusive design with an overall length of only 12.20″ (310.0 mm)
  • Plugs into any standard XLRF-type connector, or direct mounts to 5/8″-27 stands using included thread-mount adapter
  • Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
  • Available interchangeable elements permit angle of acceptance from 90º to 360º
  • Small-diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance

Specifications

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: MicroLine®
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 107 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 4 mA typical
  • Switch: Flat, roll-off
  • Weight: 3.6 oz (102 g)
  • Dimensions: 12.20″ (310.0 mm) long, 0.31″ (8.0 mm) head diameter, 0.74″ (18.9 mm) base diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8138 foam windscreen; AT8651 thread-mount adapter; AT8658 shock mount