d&b T10 loudspeaker

d&b T10 loudspeakerd&b T10 loudspeaker


The d&b T10 loudspeaker is extremely versatile – it can be configured as a line-array element or a point-source loudspeaker and has an extensive range of rigging to facilitate flying, ground-stacking or stand-mounting.

The d&b T10 is a passive 2-way loudspeaker housing two 6.5″ drivers positioned in a dipolar arrangement and a 1.4″ HF compression driver and a passive crossover network. The d&b T10 can be used both as a line array and as a high directivity point source loudspeaker. The HF driver is fitted to a unique waveguide horn producing vertical line source directivity with a 90° horizontal pattern that is maintained down to approximately 600 Hz. An acoustic lens placed in front of the horn widens horizontal dispersion to 105°, rotation of the horn by 90° relative to this produces an accurate point source dispersion, transforming a vertically oriented T10 into a stand-alone full range loudspeaker with 90° horizontal and 35° vertical directivity pattern. The T10 cabinet is constructed from polyurethane integral hard foam, incorporates integrated line array rigging hardware and has an impact resistant finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.

Up to 4 x d&b T10 loudspeakers per channel can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T10.

Components 2 x 6.5″ / 1 x 1.4″ exit compression driver on rotatable waveguide
Max. sound pressure (1m, free field)1 with D12 130 dB SPL in Point source configuration
132 dB SPL in Line/Arc configuration
Max. sound pressure (1m, free field)1 with D6 127 dB SPL in Point source configuration
129 dB SPL in Line/Arc configuration
Power handling capacity (RMS / peak 10 ms) 200 / 800 W
Frequency response (-5 dB) 68 / 1202 Hz – 18 kHz
Nominal dispersion angle (point source, h x v) 90° x 35°
Nominal dispersion angle (line array, horizontal) 105°
Splay angle settings 0 – 15° (1° increment)
Cabinets per channel D6 / D12 4
Dimensions mm (H x W x D) 197 x 470 x 300
Weight kg 11
Dimensions inch (H x W x D) 7.7 x 18.5 x 11.8
Weight lb 24
  • 1   SPL max peak test signal: pink noise with crest factor 4
  • 2   standard/CUT mode