Features:
30 EQ filter faders on ISO centres, each with nominal +/-15dB of gain. Positive centre-detent on 45mm long-throw precision faders.
Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz.
LF Contour: Smooth shelving filter, +/-6dB of gain at 50Hz
HF Contour: Smooth shelving filter, +/-6dB of gain at 14kHz.
GAIN: Overall unity gain adjustable from - infinity to +10dB.
Triple-point clip detector that indicates red when the internal signal is clipping at any one of three critical points.
LED Meter shows output signal level (input signal when eq is bypassed) from -24dBu to 18dBu in 8 steps.
Specifications:
(HP filter set to OUT. GAIN, HF, LF & all faders set to 0).
Input Section.
Input Impedance: 10kOhm, electronically balanced.
Maximum Imput Level: >+20dBu.
CMRR: >-40dB @1kHz.
Output section:
Output Impedance: < 50 Ohms, electronically balanced.
Maximum Output Level: >+20dBu into 600 Ohms.
Filters:
HP filter control: OUT to 250Hz @ 12dB/octave.
LF contour: +/-6dB shelving @ 50Hz 6dB/octave.
HF contour: +/-6dB shelving @ 14kHz 6db/octave.
FREQUENCY bands: +/-15dB on ISO centres with a Q of 4.
General Performance:
Frequency Response: 5Hz to 45kHz +/-1dB.
Noise: <-94dBu 22Hz to 22kHz.
Dynamic Range: > 115dB.
Cross Talk: >-80dB @1kHz.
Distortion: <0.005%THD (80kHz measurement BW) 20Hz-20kHz.
GAIN control: +10dB to -infinity.
Physical specifications:
Dimensions: 19" x 5.25" x 7.1" (483mm x 134mm x 180mm).
Weight: 6.6lbs (3kgs).
AC Power: 115/230V AC, 50/60Hz, 30VA.
|
