Yamaha EMX-5000/12 12-ch. 1kW powered mixer

Features
The Yamaha EMX5000/12 offers a comprehensive range of features in a compact package.

The mixer section has eight mono mic/line channels plus two stereo line-level channels. Each channel has signal/peak level LEDs showing the input level which is variable wit the gain control. There are two pre-/post-fade auxiliary sends with master faders plus two dedicated post-fade effects sends linked to two internal high-quality SPX-series digital effects units also with master faders.

The two internal amplifiers can be set to drive either a mono or stereo Front Of House mix, a mono mix plus one Aux (monitor) mix, or two monitor mixes. In the last case the master output can be sent to an external power amplifier to drive larger systems, such as our 2kW Logic System.

Specifications
Maximum Output Power @0.5% THD at 1kHz

500W+500W/4ohms
325W+325W/8ohms
1000W/8ohms bridge

Input Connectors

CH1-8: XLR and TRS Phone
CH9/10, 11/12: 2 x Phones and 2 x RCA pins

Inserts on mono channels

EQ (mono channels)

HIGH: 10kHz shelving
MID: 250Hz-5kHz peaking
LOW: 100Hz shelving

EQ (stereo channels)

HIGH: 10kHz shelving
MID: 2.5kHz peaking
LOW: 100Hz shelving

2 AUX Sends (switchable pre-/post-fade)
2 x post-fade effects sends
+48V phantom power
9 band graphic equalizer (63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz)Dual SPX Digital Multi Effector (24bit AD/DA, 32bit Internal Processing)

Effect 1 (16 programs)

Reverb hall
Reverb Vocal 1
Reverb vocal 2
Reverb room
Reverb plate
Reverse gate
Delay 1
Delay 2
Vocal echo 1
Vocal echo 2
Mod delay
Chorus
Phaser
Radio voice
Pitch change
Tremelo

Effect 2 (16 programs)

Reverb hall
Reverb Vocal 1
Reverb vocal 2
Reverb room
Reverb plate
Reverse gate
Delay 1
Delay 2
Vocal echo 1
Vocal echo 2
Early reflection
Gate reverb
Doubler
Symphonic
Flange
Distortion
Tap delay

Power Amplifier Modes (switchable from front panel)

Master L + Master R
Aux1 + mono Master
Aux1 + Aux2
Mono bridge

Power Select Switch: 500W / 300W / 100W
2 x 13 point meters
Yahama Speaker Processing
Low Pass Filter (adjustable) on Mono out
Stand-by switch
LAMP Connector (XLR 3pins)
Foot Switch: Effect 2 On/Off, TAP
Dimensions (W x H x D): 478 x 158 x 538 mm
Weight: 15 kg
Power Requirements / Consumption: 230V AC 50Hz 550W