Yamaha MSR-800W powered subwoofer

Features

The perfect partner for the Yamaha MSR400
The Yamaha MSR800W was developed with the same basic concepts as theYamaha MSR400 powered speaker: sophisticated design and powerful sound. The Yamaha MSR800W is the ideal way to extend the low end and sonic impact of an Yamaha MSR400 system … or any other system for that matter. It will integrate smoothly into existing speakers systems to deliver enhanced low-end in any live-sound application.

Up To 800 Watts from a 15-inch Woofer in a Bass Reflex Enclosure
With its bass reflex enclosure housing a 15-inch woofer and powerful built-in amplifier the Yamaha MSR800W delivers solid lows with up to 800 watts of power (burst; 500 watts continuous). These are thunderous lows that you can feel, delivering the bass impact you need for dance music or live concerts.

Thru and Bypass Outputs
The rear panel provides Thru and Bypass outputs that can be used to connect the Yamaha MSR800W to other speakers in a variety of setups. Even if your mixer does not have a dedicated subwoofer output, the Bypass output makes it easy to construct a high-performance subwoofer system.

80 to 100 Hz High-pass Filter
The Yamaha MSR800W has a frequency range of 40 to 120 Hz. It provides excellent coverage of the ultra-low range that’s vital for commanding kick drum and bass sounds. A steep 18 dB/octave high-cut filter lets you adjust the upper roll-off of the frequency range reproduced by the sub-woofer from 80 to 100 Hz, for ideal matching with your source and the style of music you’re reproducing.

Peak LED for Visual Level Monitoring
In addition to the green LED that lights when the power is turned on, there’s a peak LED that lights red when an input overload occurs. This provides a visual indication of excessive input, allowing you to adjust the input level appropriately.

Specifications

Type Bass-reflex powered subwoofer
Frequency
Response
40Hz – 120kHz
Max SPL 122dB (1m)
Dimensions 600W x 521H x 590D mm
Weight 45Kg
Pole socket 35mm
Enclosure Bass-reflex type
Components 15″ cone
Output
Power
500W @ 100Hz, THD = 1%, RL = 8Ω
Input Sensitivity. +4dB
Input Impedence 30kΩ
Connectors (input/output) Input (CHA & B): XLR3 balanced
THRU Out(CHA & B): XLR3 balanced
Hi PASS Out(CHA & B): XLR3 balanced
(100Hz, 18dB/Oct, +4dB)
Control MASTER Level
CUT OFF FREQ: 80Hz to 100Hz variable
PHASE switch: NORM/REV
POWER switch (ON/OFF)
Indicator Power: green LED
Clipping: Red LED
Power Consumption 200W