Yamaha RIO3224D Dante digital stagebox – 32 IN 16 OUT

Yamaha RIO3224D Dante digital stage box

The Yamaha RIO3224D digital stagebox offers redundant Dante networking over CAT5 to add excellent quality pre-amps to Yamaha Cl and QL-series digital mixing consoles, or other equipment using the Dante protocol. Gain compensation allows the connection of multiple consoles, for stage monitoring etc, without unwanted signal changes.

Specifications

Sampling frequency rate External 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0%
Signal delay Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
Total harmonic distortion Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min.
Frequency response +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz
Dynamic range 108dB typ., INPUT to OUTPUT, Input Gain = Min
Hum & noise level Equivalent input noise -128dBu typ., Equivalent Input Noise, Input Gain=Max
Residual output noise -88dBu Residual output noise, ST master off
Crosstalk -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.
Power requirements US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
Power consumption 120W
Dimensions W 480mm (18 7/8in)
H 232mm (9 1/4in)
D 362mm (14 1/4in)
Net weight 12.4kg (27.3lb)
Accessories Dante Virtual Soundcard license sheet
Others Temperature Range: Operating temperature range: 0 – 40℃, Storage temperature range: -20 – 60℃

Analog input characteristics

Input Terminals GAIN Actual Load
Impedance
For Use With
Nominal
Input Level Connector
Nominal Max. before clip
INPUT
1-32 (Rio3224-D)
1-16 (Rio1608-D)
1-8 (Ri8-D)
+66dB 7.5kΩ 50-600Ω Mics &
600Ω Lines
-62dBu (0.616mV) -42dBu (6.16mV) XLR-3-31 type (Balanced)*1
-6dB +10dBu (2.45V) +30dBu (24.5V)

*1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All input AD converters are 24bit linear, 128times oversampling.
*4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch. *5. Rio3224-D only

Analog output characteristics

Output Terminals Actual Source
Impedance
For Use With
Nominal
Max.Output Level
Select SW*4
Output Level Connector
Nominal Max. before clip
OUTPUT
1-16 (Rio3224-D)
1-8 (Rio1608-D, Ro8-D)
75Ω 600Ω Lines +24dB (default) +4dBu (1.23 V) +24dBu (12.3V) XLR-3-32 type (Balanced)*1
+18dB -2dBu (616mV) +18dBu (6.16V)

*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All output DA converters are 24bit, 128times oversampling.
*4. There are switches inside the body to preset the maximum output level. *5. Rio3224-D only

Digital Input & Output Characteristics

Terminal Format Data length Level Audio Connector
Primary/Secondary Dante 24bit or 32bit 1000Base-T 24ch Input/32ch Output (Rio3224-D)
8ch Input/16ch Output (Rio1608-D)
8ch Output (Ri8-D)
8ch Input (Ro8-D)
etherCON Cat5e (Rio3224-D, Rio1608-D)
RJ-45 (Ri8-D, Ro8-D)

Digital Output Characteristics

Terminal Format Data length Level Connector
AES/EBU OUT 1/2 – 7/8 *1 AES/EBU Professional Use 24bit RS422 XLR-3-32 type (Balanced)*2

*1 Rio3224-D only
*2. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )